|
|
Type of product:
|
|
Custom Dyed Marquetry Crests - USAF
|
|
Material:
|
|
Dyed Veneer, Solid Cherry
|
|
Methods used:
|
|
Laser cutting, detailed assembly, vaccuum pressing, machining and finishing.
|
|
Description:
|
|
We started this project with 12 different JPEG logos. We converted the image files to
CAD data by importing the pictures into our program and tracing around the individual colors.
We then converted each color into an individual cad file and laser cut the "puzzle pieces". The veneers
we selected were aniline dyed veneer, the color goes all of the way through the veneer... so it could be
sanded the same way a normal veneer would be. The whole project save the dying of the veneer was
completed in house.
|
|
|
|
Type of product:
|
|
Kindel Furniture Occasional Table.
|
|
Material:
|
|
Mahogany plywood of varied thickness.
|
|
Methods used:
|
|
Laser cutting, Laser etching
|
|
Description:
|
|
For this project we developed our cad data from Kindel's blueprints. Kindel supplies
us with all materials and we laser cut the frets, corner brackets and stretchers. We
also laser etch a knurled pattern for a moulding that they apply. All materials are
then sent back to Kindel to be machined and assembled into the case that you see.
|
|
|
|
Type of product:
|
|
Library Shelving End Panels
|
|
Material:
|
|
Maple faced MDF composite, Laminite
|
|
Methods used:
|
|
Laser Cutting, Hot Pressing, Maching and Finishing
|
|
Description:
|
|
For this type of end panels we laser cut a 1/4" maple faced MDF and hot press it to a
core and backer to the net 1 1/4" thickness. The panel is then machined, edge banded,
sanded and finished. We also laser cut a contrasting colored laminate insert to be
glued into place.
|
|
|
|
Type of product:
|
|
John Widdicomb 4230 Top Face
|
|
Material:
|
|
1/42nd thick Exotic Veneer
|
|
Methods used:
|
|
Laser Cut, Veneer Assembly
|
|
Description:
|
|
John Widdicomb contracted us to provide the sketch veneer for this case. We were
provided a blueprint which we generated our cad data from. We then broke out the
individual "puzzle pieces" and optimized them for the material we were using. After
Laser cutting the components of the face, we assambled the veneer using our custom
built assembly stations. John Widdicomb Hot pressed the faces and added then to thier
case.
|
|
|
|
Type of product:
|
|
Custom Cross Sketch Face
|
|
Material:
|
|
1/42nd veneer
|
|
Methods used:
|
|
Laser Cut, Veneer Assembly
|
|
Description:
|
|
This marquetry is a original one of a kind piece that went on the face of a reception
desk for St. Mary's visitation center.
|
|
|
|
Type of product:
|
|
Custom Marquetry
|
|
Material:
|
|
1/42nd veneer
|
|
Methods used:
|
|
Laser cutting, veneer assembly
|
|
Description:
|
|
The sketch provided for Lincoln was on a stock certificate and was aproximately 4".
We scanned in the artwork and added detail to make a design that ended up around 3'.
We spent great care in selecting materials that would have just the right grain
pattern and color to make the detail look right. This work was installed in the
center of a 30' conference table for Lincoln Mututal Savings and Loan.
|
|
|
|
Type of product:
|
|
Children's Chairs
|
|
Material:
|
|
Curved Maple Plywood
|
|
Methods used:
|
|
Laser cut using curve-contouring hardware
|
|
Description:
|
|
These Blanks come in from our customer with the top and front of the chair untrimmed.
We set up and use our laser's contouring capabilities to closely follow the curve of
the chair and laser cut the different designs that our customer offers.
|
|
Home
Our Philosophy
Inlaid Flooring
Fretwork Overlays
Brackets
